DSEND DIAMONDFLEX™ Frame Protection Installation Instructions

If you want to protect your mountain bike frame from scratches and damage, our easy-to-install frame protection products are the perfect solution. Follow these simple steps to install the protection on your bike:

What you need to start:

  • Rubbing Alcohol (Isopropyl alcohol 70%+) or alcohol wipes to clean the surface and ensure proper adhesion
  • Lint-free cloth to remove any residue or dirt from the surface
  • Optional: Squeegee card or hard plastic to work out any hard-to-push-down or tight sections
  • Optional: Scissors or box cutter to cut shapes or make pieces into different shapes

Instructions (Read all first) 🔧

  1. Wash your hands thoroughly before starting to ensure a clean installation.

  2. Clean the section of your mountain bike where you want to place the frame protection using rubbing alcohol and the lint-free cloth. Make sure to remove any residue, dirt, or fluff to ensure maximum adhesion.

  3. Peel back the protective layer of the frame protection with your clean hands and align the middle end-to-end with your eye as straight as possible.

  4. Carefully stick down just the middle of the piece end-to-end, making sure it's lined up before pushing it down all the way. You can unstick and reposition it, but only a little bit.

  5. With the middle line stuck down, start working your way from the center outwards to one edge, slowly pushing it down as you go.

  6. Repeat the process on the other side, going super slow and putting pressure on all places to ensure it's firmly stuck down. Pay attention to the edges as these need to be super firm so they stay down. Repeat for all parts.

  7. That's it! Ideally, wait 12-24 hours before riding to let the adhesive settle. Ride your mountain bike with confidence, knowing that your frame is protected by our high-quality frame protection products.

To Remove - Using a Heat gun or Hair Dryer, apply some gentle heat along the piece and start to peel away from one end. We use premium adhesive so you should not have any issues getting it off and not leaving any nasty residue behind affecting your bike's finish. 

By following these simple instructions, you can easily install our frame protection products and enjoy worry-free rides on any terrain. Order our frame protection products today and keep your mountain bike frame safe and protected.